RESEARCH

1. Abbasi, S. A., Khaliq, Q., Omar, M. and Riaz, M. (2020). On designing a sequential based EWMA structure for efficient process monitoring. Journal of Taibah University of Science, Accepted. [ISI Impact: 1.640].
2. Abbas, N., Saeed, U., Riaz, M. and Abbasi, S. A. (2020). On designing an assorted control charting approach to monitor process dispersion: an application to hard-bake process. Journal of Taibah University of Science, 14(1), 65-76. [ISI Impact: 1.640].
3. Riaz, M., Abid, M., Nazir, H. Z. and Abbasi, S. A. (2019). An enhanced nonparametric EWMA sign control chart using sequential mechanism. PlOS ONE, 14(11): e0225330. [ISI Impact: 2.776].
4. Abbasi, S. A. (2019). Location charts based on ranked set sampling for normal and non-normal processes. Quality and Reliability Engineering International, 35(6), 1603-1620. [ISI Impact: 1.409].
5. Abbasi, S. A., Abbas, T., Adegoke, N. A. (2019). Efficient CV control charts based on ranked set sampling. IEEE Access, 7, 78050-78062. [ISI Impact: 4.098].
6. Adegoke, N. A., Abbasi, S. A., Smith, A. N., Anderson, M. J., Pawley, M. D. (2019). A Multivariate Homogeneously Weighted Moving Average Control Chart. IEEE Access, 7, 9586-9597. [ISI Impact: 4.098].
7. Mahmood, T., Abbasi, S. A., Riaz, M., Abbas, N. (2019). An Efficient Phase I Analysis of Linear Profiles with Application in Photo-Voltaic System. Arabian Journal for Science and Engineering, 44(3), 2699-2716. [ISI Impact: 1.518].
8. Ahmad, S., Riaz, M., Hussain, S., Abbasi, S. A. (2019). On auxiliary information-based control charts for auto-correlated processes with application in manufacturing industry. The International Journal of Advanced Manufacturing Technology, 100(5-8), 1965-1980. [ISI Impact: 2.496].
9. Riaz, M., Mahmood, T., Abbas, N., Abbasi, S. A. (2019). On improved monitoring of linear profiles under modified successive sampling. Quality and Reliability Engineering International, 35(7), 2202-2227. [ISI Impact: 1.409].
10. Adegoke, N. A., Abbasi, S. A. K. A., Dawod, A. B.A., Pawley, M. D.M. (2019). Enhancing the performance of the EWMA control chart for monitoring the process mean using auxiliary information. Quality and Reliability Engineering International, 35(4), 920-933. [ISI Impact: 1.409].
11. Saeed, U., Riaz, M., Abbas, N., Abbasi, S. A. (2019). An Assorted Design for Joint Monitoring of Process Parameters: An Efficient Approach for Fuel Consumption. IEEE Access, 7, 104864-104875. [ISI Impact: 4.098].
12. Osei-Aning, R., Abbasi, S. A. (2019). Efficient bivariate EWMA charts for monitoring process dispersion. Quality and Reliability Engineering International. [ISI Impact: 1.409].
13. Abbas, T., Abbasi, S. A., Riaz, M., Qian, Z. (2019). Phase II monitoring of linear profiles with random explanatory variable under Bayesian framework. Computers & Industrial Engineering, 127, 1115-1129. [ISI Impact: 3.518].
14. Abbasi, S. A., Abbas, T., Riaz, M., Gomaa, A.-S. (2018). Bayesian monitoring of linear profiles using DEWMA control structures with Random X. IEEE Access, 6, 78370 - 78385. [ISI Impact: 4.098].
15. Abbasi, S. A., Adegoke, N. A. (2018). Multivariate coefficient of variation control charts in phase I of SPC. The International Journal of Advanced Manufacturing Technology, 99(5-8), 1903-1916. [ISI Impact: 2.496].
16. Dawod, A. B., Abbasi, S. A., Al-Momani, M. (2018). On the performance of coefficient of variation control charts in Phase I. Quality and Reliability Engineering International, 34(6), 1029-1040. [ISI Impact: 1.409].
17. Adegoke, N. A., Smith, A. N., Anderson, M. J., Abbasi, S. A., Pawley, M. D. (2018). Shrinkage estimates of covariance matrices to improve the performance of multivariate cumulative sum control charts. Computers & Industrial Engineering, 117, 207-216. [ISI Impact: 3.518].
18. Dawod, A. B., Al-Momani, M., Abbasi, S. A. (2018). On efficient estimation strategies in monitoring of linear profiles. The International Journal of Advanced Manufacturing Technology, 96(9-12), 3977-3991. [ISI Impact: 2.496].
19. Baqar, M., Arslan, M., Abbasi, S. A., Ashraf, U, Khalid, A. and Zahid, H. (2018). Noise Pollution in the hospital environment of a developing country: A Case Study of Lahore Pakistan. Archives of Environmental and Occupational Health. 73(6), 367-374. [ISI Impact: 1.483].
20. Abbasi, S. A. (2017). Poisson progressive mean control chart. Quality and Reliability Engineering International, 33(8), 1855-1859. [ISI Impact: 1.409].
21. Osei‐Aning R, Abbasi S. A., Riaz M. (2017). Mixed EWMA-CUSUM and Mixed CUSUM-EWMA modified control charts for monitoring first order Autoregressive processes. Quality Technology and Quantitative Management. 14 (4), 429-453 [ISI Impact: 0.946].
22. Osei‐Aning R, Abbasi S. A., Riaz M. (2017). Optimization design of the CUSUM and EWMA charts for autocorrelated processes. Quality Reliability Engineering International. 33(8), 1827-1841. [ISI Impact: 1.409].
23. Riaz, M., Mahmood, T., Abbasi, S. A., Abbas, N., & Ahmad, S. (2017). Linear profile monitoring using EWMA structure under ranked set schemes. The International Journal of Advanced Manufacturing Technology, 91 (5 – 8), 2751 – 2775. [ISI Impact: 2.496].
24. Dawod, A. B. A., Riaz M. and Abbasi S. A. (2017). On model selection for auto-correlated processes in statistical process control. Quality and Reliability Engineering International, 33 (4), 867 – 882. [ISI Impact: 1.409].
25. Mehmood, R., Riaz, M., Mahmood, T., Abbasi, S. A. and Abbas, N. (2017). “On the extended use of auxiliary information under skewnesss correction for process monitoring”, Transactions of the Institute of Measurement and Control, 39 (6), 883-897. [ISI Impact: 1.956].
26. Abujiya, M., Abbasi, S. A. and Riaz, M. (2016). “A new EWMA control chart for monitoring poison observations, Quality and Reliability Engineering International, 32 (8), 3023-3033. [ISI Impact: 1.409].
27. Osei-Aning, R., Abbasi, S. A. and Riaz, M. (2016). “Monitoring of serially correlated processes using residual control charts”, Scientia Iranica, 24 (3), 1603-1614.
28. Abbasi, S. A., Ahmad, S. and Riaz, M. (2016). “On enhanced sensitivity of nonparametric EWMA control charts for process monitoring”, Scientia Iranica, 24 (1), 424.
29. Abbasi, S. A. (2015). “Exponentially weighted moving average chart and two component measurement error”, Quality and Reliability Engineering International, 32 (2), 499-504. [ISI Impact: 1.409].
30. Rukh, L., Choudhary, M. A., Abbasi, S.A. (2015). Analysis of factors affecting employee satisfaction: A case study from Pakistan, Work, 52 (1), 137-152. [ISI Impact: 1.009].
31. Abbasi, S. A. and Riaz, M. (2015). “On dual use of auxiliary information for efficient monitoring”, Quality and Reliability Engineering International, 32 (2), 705-714. [ISI Impact: 1.409].
32. Zamn, B., Riaz, M., Ahmad, S. and Abbasi, S. A. (2015). “On artificial neural networking based process monitoring under bootstrapping using runs rules schemes”, Int J Adv Manuf Technol, 76, 311-327. [ISI Impact: 2.496].
33. Riaz, M., Mehmood, R., Iqbal, M. R. and Abbasi, S. A. (2015). “On efficient skewness correction charts under contamination and non-normality, Quality and Reliability Engineering International, 32 (3), 837-854. [ISI Impact: 1.409].
34. Abbasi, S. A., Riaz, M., Miller, A., Ahmad, S. and Nazir, H. Z. (2015). “EWMA dispersion control charts for normal and non-normal processes”, Quality and Reliability Engineering International, 31 (8), 1691-1704. [ISI Impact: 1.409].
35. Abbasi, S. A., Riaz, M., Miller, A. and Ahmad. S. (2015). “On the performance of Phase I dispersion control charts for process monitoring”, Quality and Reliability Engineering International, 31 (8), 1705-1716. [ISI Impact: 1.409].
36. Zaman, B., Riaz, M. and Abbasi, S. A. (2015). “On the efficiency of runs rules schemes for process monitoring”, Quality and Reliability Engineering International, Quality and Reliability Engineering International, 32 (2), 663-671. [ISI Impact: 1.409].
37. Riaz, M., Mehmood, R., Abbas, N. and Abbasi, S. A. (2015). “On effective dual use of auxiliary information in variability control charts”, Quality and Reliability Engineering International, 32 (4), 1417-1443. [ISI Impact: 1.409].
38. Abbasi, S. A. (2014). “Monitoring analytical measurements in presence of two component measurement error”, Journal of Analytical Chemistry, 69 (11), 1023-1029. [ISI Impact: 0.723].
39. Ahmad. S., Abbasi, S. A., Riaz, M. and Abbas, N. (2014). “On efficient use of auxiliary information for control charting in SPC”, Computers & Industrial Engineering, 67, 173-184. [ISI Impact: 3.518].
40. Riaz, M., Abbasi, S. A., Ahmad, S. and Zaman, B. (2014). “On efficient Phase II process monitoring charts”, Int J Adv Manuf Technol, 70 (9-12), 2263–2274. [ISI Impact: 2.496].
41. Ahmad, S. Riaz, M., Abbasi, S. A. and Lin, Z. Y. (2014). “On median control charting under double sampling scheme”. European Journal of Industrial Engineering, 8(4), 478-512. [ISI Impact: 1.217].
42. Ahmad, S. Riaz, M., Abbasi, S. A. and Lin, Z. Y. (2014). On efficient median control charting. Journal of the Chinese Institute of Engineers. 37 (3), 358-375. [ISI Impact: 0.651].
43. Abbasi, S. A., Miller, A. and Riaz, M. (2013). “Nonparametric Progressive Mean Control Chart for the Monitoring of Process Target”, Quality and Reliability Engineering International, 29 1069–1080. [ISI Impact: 1.409].
44. Riaz, M., Mehmood, R., Ahmad, S. and Abbasi, S. A. (2013). “On the performance of auxiliary-based control charting under normality and non-normality with estimation effects”, Quality and Reliability Engineering International, 29 (8), 1165-1179. [ISI Impact: 1.409].
45. Saghir, A., Lin, Z., Abbasi, S. A. and Ahmad, S. (2013). “The use of probability limits of COM-Poisson charts and their applications”, Quality and Reliability Engineering International, 29 (5), 759 – 770. [ISI Impact: 1.409].
46. Ahmad, S. Riaz, M., Abbasi, S. A. and Lin, Z. Y. (2013). On monitoring process variability under double sampling scheme. International Journal of Production Economics. 142, 388-400. [ISI Impact: 4.998].
47. Abbasi, S. A. and Miller, A. (2013). “MDEWMA Chart: An efficient and robust alternative to monitor process dispersion”, Journal of Statistical Computation and Simulation, 83 (2), 247-268 [ISI Impact:0.767].
48. Abbasi, S. A., Riaz, M. and Miller, A. (2012). “Enhancing the performance of CUSUM scale chart”, Computers & Industrial Engineering, 63, 400-409. [ISI Impact: 3.518].
49. Abbasi, S. A. and Miller, A. (2012). “On proper choice of variability control chart for normal and non-normal processes”, Quality and Reliability Engineering International, 28 (3), 279 - 296. [ISI Impact: 1.409].
50. Abbasi, S. A. (2012). “Letter to the Editor: A new nonparametric EWMA sign control chart”, Expert Systems with Applications, 39 (9), 8503. [ISI Impact: 4.292].
51. Abbasi, S. A. (2010). “On the performance of EWMA chart in presence of Two Component Measurement error”, Quality Engineering, Vol. 22, No. 3, 199 - 213. [ISI Impact: 1.626].
1. Abbasi, S. A. and Arslan, M. (2019). “Auxiliary information based CV control chart for efficient monitoring of process CV”, International Conference on Industrial Technology and Management, May 02-04, 2019, University of Cambridge, Cambridge, UK.
2. Abbasi, S. A. (2018). “Auxiliary information based control charts for monitoring process location”, International Conference on New Advances in Statistics, May 11-13, 2018, St. Petersburg, Russia.
3. Abbasi, S. A. (2016). “Non-parametric EWMA sign control chart with estimated parameters, June 11-16, 2016, 3rd ISNPS, Avignon, France.
4. Abbasi, S. A. (2015). “On robustness of progressive mean control chart”, Eight International Workshop on Simulation, Sept 21-25, 2015, Vienna, Austria.
5. Abbasi, S. A. and Miller, A. (2011). “D Chart: An Efficient Alternative to Monitor Process Dispersion”, Proceedings of the World Congress on Engineering and Computer Science 2011 Vol II, WCECS 2011, October 19-21, 2011, pages 933-938, San Francisco, USA.
6. Abbasi, S. A. and Miller, A. (2011). “Sensitivity of EWMA control charts”, New Zealand Statistical Association Conference (NZSA 2011), 28-31 August, 2011, Auckland, New Zealand.
7. Abbasi, S. A. (2010). “On sensitivity of EWMA chart for monitoring process dispersion”, Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2010, Vol III, WCE 2010, 30 June - 2 July, pages 2027-2032, London, U.K.
8. Riaz, M. and Abbasi, S. A. (2008). “Gini’s mean difference based time varying EWMA charts”, 4th International Conference on Statistical Sciences, University of Gujrat & ISOSS, May 9-11, 2008, Gujrat, Pakistan.